Microwave assisted ultrafast synthesis of graphene oxide based magnetic nano composite for environmental remediation

We have successfully synthesized multi-layer graphene oxide and graphene oxide based magnetic nanocomposite (M/GO) by microwave-assisted modified Hummers’ method for removal of toxic lead (Pb²⁺) and cadmium (Cd²⁺) ions from aqueous solution. The X-ray diffraction spectra of synthesized graphene oxide and M/GO confirm increased interlayer spacing along c-axis. Raman spectra revealed the good quality of synthesized GO and M/GO. The wrinkles were seen in the SEM images of synthesized graphene oxide. The presence of conjugated double bond (CC) and carbonyl (CO) were confirmed by using the UV–Vis spectroscopic spectra. Brunauer–Emmett–Teller (BET) analysis showed high (126 m²/g) surface area M/GO composite which accounts for large number of active binding sites for the adsorption of heavy metal ions. The adsorption studies revealed that Pb²⁺ ions were efficiently adsorbed on GO sheets. Interestingly, M/GO showed better adsorption for cadmium ions.     

新型导电填料镀银石墨粉末的研制

将普通片状石墨粉末经过氧化处理后,先进行化学镀铜再进行化学镀银。给出了各工艺的规范,分析了各工艺的影响因素,测试了镀层性能。结果表明,添加了银包石墨粉末的硅橡胶,其体积电阻率为2.0×10–4Ω·cm,在低频区的屏蔽效能为75dB,是一种良好的电磁屏蔽导电填料。     

Crystallization of poly(3‐hydroxybutyrate) by exfoliated graphite nanoplatelets

Poly(3‐hydroxybutyrate) (PHB) has been shown to be efficiently nucleated by exfoliated graphite nanoplatelets (xGnP). The nucleating effect of xGnP was investigated using differential scanning calorimetry, optical microscopy and atomic force microscopy. Nonisothermal crystallization of PHB from the melt required lower activation energies for PHB containing 1 wt % and 3 wt % xGnP (?214 and ?102 kJ/mol respectively) than for pure PHB (?60 kJ/mol). A kinetic study of the PHB/xGnP crystallization employing a modified form of the Avrami equation revealed that the presence of xGnP increased the PHB crystallization temperature, as well as the crystallization rates, and generated smaller and more numerous spherulites. Optical microscopy and atomic force microscopy confirmed the incorporation of xGnP into the lamellar structure of the PHB spherulites and provided insight into the influence of xGnP on spherulite size and lamellae thickness. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

三氯化铁为插入剂制备膨胀石墨

探讨了三氯化铁为插入剂的膨胀石墨的制备技术，分析了反应物与膨胀容积、硫含量之间的关系。     

石墨电极炼钢时受力状态的有限元研究

采用有限元法对比研究了φ５００ｍｍ的日本电极和国产电极炼钢时电极－接头连接区的热应力分布，对结果进行了分析和讨论，并提出了相应的结论和建议。     

羧甲基纤维素包覆天然石墨性能的研究

本实验研究了羧甲基纤维素(CMC)包覆对天然石墨电化学性能的影响。通过XRD、恒电流充放电测试手段研究了不同包覆量对该复合材料结构和电化学性能的影响。结果表明:羧甲基纤维素裂解炭对天然石墨有较好的包覆作用,并且能够有效的阻止石墨在充放电过程中发生层状剥落现象,从而有效的提高复合炭材料的循环稳定性,其中5%树脂包覆量的复合材料在循环50次之后可逆容量是310.9 mAh.g-1,比天然石墨高50 mAh.g-1,并保持了首次可逆容量的97.1%。     

Al2O3包覆石墨颗粒的制备及表征

以Al(NO3)3·9H 2O为主要原料,采用非均匀成核技术在鳞片状石墨表面包覆一层Al2O3,制备成石墨/氧化铝复合粉体.对复合粉体的制备条件、表面形貌和特性进行了研究.研究表明pH值、处理温度和覆层物质前驱体浓度是影响包覆的主要因素.TEM观察和XPS能谱检测表明,石墨颗粒表面均匀包覆有一层Al2O3.包覆后石墨表面由疏水转为亲水.     

导电复合材料的研究

以铝粉，乙炔炭黑，石墨等导电填料，不饱和聚酯树脂为基休一项玻璃纤维布为增强材料制成复合型导电复合。研究了导电填料不同种类，添加量对复合材料性能的影响。     

锂离子电池炭负极材料研究现状与发展

综述了近年来各种炭材料作为锂离子电池负极材料的新进展，着重分析了石墨、焦炭和难石墨化炭在放电容量、不可逆容量损失、充放电电位和充放电速率等主要性能上的差异以及与其结构之间的联系；指出以PAS为代表的热解炭(低于800℃)和纳米炭材料将是锂离子电池负极材料的发展方向。     

氧化硼作为电极涂层的研究

以水和磷酸二氢铝为粘结剂，对氧化硼作为电极防氧化涂层进行了研究。通过调整涂层的配比浓度，并采用预先浸泡的方法，使涂层与电极本体的粘结性能提高，石墨炭块试样在900℃的高温下长时间不氧化。